en: The data includes (1) amphibian occurrence data (2017-2019) for ten species across the cantons of Aargau and Zürich gathered from the Coordination Center for the Protection of Amphibians and Reptiles of Switzerland (http://www.karch.ch), (2) amphibian whole-life cycle environmental predictors (i.e. topographic, hydrologic, edaphic, vegetation, land-use derived, movement-ecology related), and (3) local urban "green" and "grey" landcover data which can be used to identify opportunities for Blue-Green Infrastructure (through green or grey transitions) in support of regional landscape connectivity.

en: biodiversity circuit-theory ecological-corridors human-dominated-landscapes integrated-modelling urban-spatial-planning

en: Amphibian and urban-rural landscape data Swiss Lowlands

en: Processed amphibian occurrence data (2017-2019) in the cantons of Aargau and Zürich. The dataset includes information for the following species: _Alytes obstetricans_,_Bombina variegata_, _Bufo bufo_, _Hyla arborea_, _Ichtyosaura alpestris_, _Lissotriton helveticus_, _Lissotriton vulgaris_, _Rana temporaria_, _Salamandra salamandra_, and _Triturus cristatus_.

en: Amphibian monitoring data

en: Amphibian breeding sites of national importance (focal nodes) in the cantons of Aargau and Zürich, 30x30 m resolution, binarised ascii format.

en: Amphibian breeding sites of national importance - cantons of Aargau and Zürich

en:
Amphibian whole life cycle predictors include 6 variable types:
(1)	Topographic – slope [°]: derived from the Swiss Topographical Landscape model (swissTLM 3D 2015) at 2 m resolution (elevation uncertainty ± 0.5m) and, subsequently, aggregated to a median value;
(2)	Hydrologic: two predictors including nearest distance to water [m] (all water-related objects and rasterized lotic, lentic and reedbeds from the regional cadastral maps – AV: Daten der Amtliche Vermessung) and runoff coefficient [C] (between 0 and 1 relating amount of runoff to amount of precipitation, mapped AV: Daten der Amtliche Vermessung data against literature values for different land covers);
(3)	Edaphic – soil moisture variability (not available): can gathered from the spatial modelling of Ecological Indicator Values in Switzerland (Descombes et al., 2020) and resampled from 100m to 10m;
(4)	Vegetation: we calculated the median and standard deviation of the Normalized Difference Vegetation Index (NDVI) from all available cloud free Sentinel-2 pixels available between April and October for the years 2016 to 2019 (Drusch et al., 2012) and the median vegetation height [m] (not available) can gathered from Ginzler and Hobi (2015);
(5)	Land-use derived: includes three predictors, grassland density [grassland/cell] (not available) - can be gathered from Pazur et al. (2021), total grasslands area evaluated using a spatial weight matrix and a 250m neighborhood radius around each cell; urbanization [buildings/cell] – average building density for a 250m neighborhood around each cell based on the AV: Daten der Amtliche Vermessung ; and traffic intensity [vehicles/day] – average daily vehicle count (Nationales Personenverkehrsmodells);
(6)	Movement-ecology related: includes three predictors of proximity – nearest forest distance [m]; nearest rock-gravel and sandy area (RGS) distance [m] and nearest road distance [m] (considering any road type) – all calculated based on the AV: Daten der Amtliche Vermessung maps.

en: Amphibian whole life cycle predictors - 10m resolution

en: "Green" landcover refers to lawns and vegetated urban surfaces such as, for example private gardens, public parks, cemeteries, green stripes along roadsides, etc. While "grey" landcover refers to impervious grounds such as roads, troittoirs, other impervious. Binarized maps, 30x30m resolution.

en: Binarized "green" and "grey" landcover data (Cantons of Aargau and Zürich)

en: For each amphibian species we used the weighted average Ensemble model suitability map and converted it to a resistance map using an exponential decay function following (Duflot et al., 2018) using the species-specific mpa threshold previously computed (Preau et al., 2020). The function assigns a resistance value of 1,000 when habitat suitability equals zero, and a value of one when habitat suitability is greater than or equal to the binarization threshold. The exponential shape strengthens the barrier effect of less favorable areas.

en: Amphibian species specific landscape resistance maps.

biodiversity

display_name: biodiversity

circuit-theory

display_name: circuit-theory

ecological-corridors

display_name: ecological-corridors

human-dominated-landscapes

display_name: human-dominated-landscapes

integrated-modelling

display_name: integrated-modelling

urban-spatial-planning

display_name: urban-spatial-planning


$oid: OBSOLETE

en: The data results from a questionnaire survey conducted at 8 schools in the cantons Zurich, Aargau and St. Gallen. Respondents aged 13-22 years. The aim of the survey was to gain insight into teenagers' relationship to the forest, reasons for visiting or not visiting the forest and activities in the forest.

en: adolescents childhood forest recreational-activities teenagers

envidat

approval_status: approved

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

fr: EnviDat: le portail de données environnementales

it: EnviDat: il portale dei dati ambientali

political_level: other

state: active

type: organization

wsl

capacity: public

en: Factors influencing teenagers' forest visit frequency

type: dataset

key: guid

key: uri

value: Envidat Harvester

educ

de: Bildung, Kultur und Sport

en: Education, culture and sport

fr: Éducation, culture et sport

it: Istruzione, cultura e sport

en: The dataset of the questionnaire survey at schools in SPSS-format.

en: Survey at schools 2017

format: SERVICE

en: The dataset of the questionnaire survey at schools in excel format.

en: Dataset survey at schools

format: XLS

en: The codebook to the dataset

en: Dataset comments

en: The questionnaire used in the survey at 8 schools aimed at teenagers in German.

en: Questionnaire school survey

format: PDF

media_type: application/pdf

adolescents

display_name: adolescents

childhood

display_name: childhood

forest

display_name: forest

recreational-activities

display_name: recreational-activities

teenagers

display_name: teenagers


greenland-shrubs-and-microclimate

en:
 Study Aim

We collected these data to alternatively train and validate high resolution (~ 90 m) Species Distribution Models (SDMs) and Species Abundance Models (SAMs) for _Betula nana_ L. (dwarf birch, Betulaceae) and _Salix glauca_ L. (grey willow, Salicaceae) in Southwest Greenland to assess how well such models can predict local-scale patterns.

 Data Description

Individual (presence-absence, abundance, maximum vegetative height) and community (species composition, maximum canopy height) shrub data for two fjords near Nuuk, Southwest Greenland. Also provided are corresponding downscaled climate data as well as calculated topographic and terrain wetness indicator variables.

 Nuup Kangerlua (Godthåbsfjord)

_Betula nana_ and _Salix glauca_ presence-absence, abundance, community species richness

 Kangerluarsunnguaq (Kobbefjord)

Shrub presence-absence, abundance, maximum vegetative height, community composition, maximum shrub canopy height

 Methods

 Field survey in Nuup Kangerlua

We conducted a stratified systematic plant survey along the length of Nuup Kangerlua (NK) fjord in Soutwesth Greenland (Fig. 1 in Chardon et al. 2022; following Nabe-Nielsen et al., 2017). At five distinct sites, we sampled along elevational gradients to collect data on presences, absences, abundance, and species composition of all woody species using a 0.7 x 0.7 m pin-point frame (Fig. 1e in Chardon et al. 2022). For model training, we converted these pin-point data to percent cover estimates based on the number of pins dropped (n = 25 per plot) and averaged them across the 119 spatio-climatic grids (see next section) corresponding to the plot locations (for details see Appendix S2 in Chardon et al. 2022).

 Field survey in Kangerluarsunnguaq

We conducted a random stratified plant survey in Kangerluarsunnguaq (K) fjord in Southwest Greenland. We used a preliminary Species Abundance Model trained with summed pin counts of _Betula nana_ in NK fjord (see Fig. S1.3 in Chardon et al. 2022) to stratify the ~ 27 x 17 km fjord landscape into low, medium, and high abundances classes. We randomly selected 90 x 90 m spatio-climatic grids to survey in each class for a total of 200 grids, ensuring that they were accessible by foot or boat (for details see Appendix S2 in Chardon et al. 2022). Within each grid, we sampled within three 1 m2 quadrats arranged in a randomly rotated equilateral triangle centered on the mid-point of the cell. We used a gridded sampling quadrat with 1% delineations (Fig. 1h in Chardon et al. 2022) to record woody species presences, absences, and composition, estimated percent cover, and measured maximum shrub species vegetatitve height. At every plot, we also visually scanned the area in a 20 m radius from the plot and recorded the presence of any additional shrub species to estimate grid-level species richness. As in NK fjord, we averaged these data at the grid level (for details see Appendix S2 in Chardon et al. 2022).

 Biotic variables

We calculated biotic microscale variables from the plant survey data collected in NK and K fjords. We calculated shrub species richness, diversity, and competition (i.e. sum of non-B. nana or non-S. glauca pin hits or percent cover). In K fjord, we also calculated canopy height as the community weighted mean (by abundance) of maximum vegetative shrub height.

 Climate variables

We computed high resolution temperature, precipitation, and insolation for local scale data for the study area by statistically downscaling climate time series (1982 - 2013) from the monthly CHELSA data (Karger et al. 2017). We downscaled these data from 30 arc sec (~ 400 m at the latitude of our study) to our target grid size of ~ 90 m with geographic weighted regression and using the MEaSUREs Greenland Ice Mapping Project (GIMP) Digital Elevation Model (DEM) v. 1 (Howat et al., 2014, 2015). We then calculated 30-year averages of the climate parameters: average summer (June – August) maximum temperature, yearly maximum temperature, yearly minimum temperature, temperature continentality (yearly max. - min. temperatures), cumulative Spring (March – May) precipitation, cumulative summer precipitation, and average summer incident solar radiation (henceforth, insolation) (for calculation details see Appendices S2, S3 in Chardon et al. 2022 and Appendix S2 in von Oppen et al. 2021).

 Topography and terrain wetness indicator variables

We calculated several topographic and terrain wetness indices at a local scale. We derived slope, aspect, and the SAGA wetness index (hereafter TWI; Boehner et al., 2002; Boehner and Selige, 2006) from the GIMP DEM. TWI is a measure of how ‘wet’ an area is, based on water drainage from the surrounding landscape. We also calculated the tasseled cap wetness component (hereafter TCW, Crist and Cicone 1984) from satellite images (for details see Appendices S2, S3 in Chardon et al. 2022) as an alternative measure of wetness.

 Computer code

Attached as zip file and available on GitLab (https://gitlab.com/nathaliechardon/gl_microclim)

 Third-party data

Data used to calculate climate, topography, and terrain wetness indicator variables are publicly available (see Appendix S2 in Chardon et al. 2022 for all data references).

en: accessible-shrub-forest arctic climate field-data sdm validation

en: Greenland shrubs and microclimate

title_for_slug: greenland-shrubs-and-microclimate

en:
 Collected July-August 2011-2013 (PI: Jacob Nabe-Nielsen)

These data collected July-August 2011-2013 (PI: Jacob Nabe-Nielsen). Please contact J. Nabe-Nielsen (jnn_at_ecos.au.dk) to request access to data on all surveyed shrub species. Available here are only data used in Chardon et al. 2022.

 COLUMN ABBREVIATIONS

 Metadata for 90 m spatial grid

year: sampling year

alt: average altitude of grid as recorded during field surveys [m]

long: WGS84 longitude

lat: WGS84 latitude

x_stere: longitude in Polar Stereographic (EPSG 4326)

y_stere: latitude in Polar Stereographic (EPSG 4326)

 Species presence [1] or absence [0] at grid level

pa_bena: _Betula nana_

pa_sagl: _Salix glauca_

 Shrub species cover (calculated from pin hits in 0.7 x 0.7 m frame, based on total of 25 hits) [%]

cov_bena: _Betula nana_ cover

cov_sagl: _Salix glauca_ cover

 Downscaled climate (time series 1984 – 2013)

tempjja: average maximum June-August temperature [ºC]

tempmax: yearly maximum temperature [ºC]

tempmin: yearly minimum temperature [ºC]

tempcont: yearly maximum – minimum temperature [ºC]

precipmam: cumulative March-May precipitation [mm]

precipjja: cumulative June-August precipitation [mm]

insoljja: average June-August insolation [MJ cm-2 yr-1]

 Topography and terrain wetness (calculated from)

twi: SAGA wetness index (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015)

slope: slope angle (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

asp: aspect (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

tcws: Tasseled Cap Wetness component (Sentinal images)

 Community characteristics

rich: shrub species richness averaged across pin-point frames per grid

shan: Shannon diversity (‘vegan’ package; Oksanen et al. 2019)

comp_bena: shrub competition on Betula nana (i.e. summed cover of non-_B. nana_ species) [% cover]

comp_sagl: shrub competition on Salix glauca (i.e. summed cover of non-_S. glauca_ species) [% cover]

en: Nuup Kangerlua

en:
 Collected August 2020 (PI: Nathalie Isabelle Chardon)

These data collected August 2020 (PI: Nathalie Isabelle Chardon). Please contact N. I. Chardon (nathalie.chardon_at_gmail.com) for individual quadrat (i.e. 1 m x 1 m) data, which are averaged at the 90 m spatial grid here.

 COLUMN ABBREVIATIONS

 Metadata for 90 m spatial grid

id: sampling zone and unique 90 m grid identifier

long: WGS84 longitude

lat: WGS84 latitude

x_stere: longitude in Polar Stereographic (EPSG 4326)

y_stere: latitude in Polar Stereographic (EPSG 4326)

date: sampling day.month.year

 Species presence [1] or absence [0] at grid level

alcr: _Alnus crispa_

bena: _Betula nana_

dila: _Diapensia lapponica_

emni: _Empetrum nigrum_

hahy: _Harimanella hypoides_

lopr: _Loiseleuria procumbens_

oxpa: _Oxycoccus palustre_

phca: _Phyllodoce caerulea_

rhod: _Rhododendron_ sp.

saar: _Salix arctica_

sagl: _Salix glauca_

sahe: _Salix herbacea_

vaul: _Vaccinium uliginosum_

drin: _Dryas integrifolia_

thpr: _Thymus praecox_

 Habitat characteristics [% cover]

shrub: all shrub species

gram: graminoids

forb: forbs

bryo: bryophytes

lich: lichens

litt: litter

bare: bare ground

stone: stones (> 2 cm)

org: organic crust

 Shrub species height (maximum vegetative height) [mm] and cover (estimated in 1x1 m quadrat) [%]

alcr_c: _Alnus crispa_ cover

alcr_h: _Alnus crispa_ height

bena_c: _Betula nana_ cover

bena_h: _Betula nana_ height

dila_c: _Diapensia lapponica_ cover

dila_h: _Diapensia lapponica_ height

emni_c: _Empetrum nigrum_ cover

emni_h: _Empetrum nigrum_ height

hahy_c: _Harimanella hypoides_ cover

hahy_h: _Harimanella hypoides_ height

lopr_c: _Loiseleuria procumbens_ cover

lopr_h: _Loiseleuria procumbens_ height

oxpa_c: _Oxycoccus palustre_ cover

oxpa_h: _Oxycoccus palustre_ height

phca_c: _Phyllodoce caerulea_ cover

phca_height: _Phyllodoce caerulea_ height

rhod_c: _Rhododendron_ sp. cover

rhod_h: _Rhododendron_ sp. height

saar_c: _Salix arctica_ cover

saar_h: _Salix arctica_ height

sagl_c: _Salix glauca_ cover

sagl_h: _Salix glauca_ height

sahe_c: _Salix herbacea_ cover

sahe_h: _Salix herbacea_ height

vaul_c: _Vaccinium uliginosum_ cover

vaul_h: _Vaccinium uliginosum_ height

drin_c: _Dryas integrifolia_ cover

drin_h: _Dryas integrifolia_ height

 Community characteristics

rich_pa: shrub species richness at grid level

rich: shrub species richness averaged across 3 1x1 m sampling quadrats per grid

shan: Shannon diversity (‘vegan’ package; Oksanen et al. 2019)

comp_bena: shrub competition on _Betula nana_ (i.e. summed cover of non-_B. nana_ species) [% cover]

comp_sagl: shrub competition on _Salix glauca_ (i.e. summed cover of non-_S. glauca_ species) [% cover]

ht_cwm: maximum shrub canopy height (i.e. community weighted mean by abundance of maximum shrub height) [mm]

 Topography and terrain wetness (calculated from)

tcws: Tasseled Cap Wetness component (Sentinal images)

slope: slope angle (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

twi: SAGA wetness index (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015)

asp: aspect (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

 Downscaled climate (time series 1984 – 2013)

insoljja: average June-August insolation [MJ cm-2 yr-1]

precipmam: cumulative March-May precipitation [mm]

tempcont: yearly maximum – minimum temperature [ºC]

tempmin: yearly minimum temperature [ºC]

precipjja: cumulative June-August precipitation [mm]

tempjja: average maximum June-August temperature [ºC]

tempmax: yearly maximum temperature [ºC]

en: Kangerluarsunnguaq

en: Zip drive of GitLab repository contents (https://gitlab.com/nathaliechardon/gl_microclim).

en: GitLab Repository

accessible-shrub-forest

display_name: accessible-shrub-forest

arctic

display_name: arctic

climate

display_name: climate

field-data

display_name: field-data

sdm

display_name: sdm

validation

display_name: validation


causal-effect-of-lup

en:
Title: Does zoning contain built-up land expansion? Causal evidence from Zhangzhou City, China.

Research objective: Built-up land zoning is an imporatant policy measure of land use planning (LUP) to contain built-up land expansion in China. We used a difference-indifference model with propensity score matching to estimate the average and annual effect of built-up land zoning on built-up land expansion in Zhangzhou City, China between 2010 and 2020.

Data: Data.dbf contains the varibles of 1662 villages in Zhangzhou Cities in 1995, 2000, 2005, 2010, 2013, 2015, 2018, and 2020.
XZQDM2 is villages' unique administrative ID;
Area is the land area of village i;
Dis2water is the Euclidean distance from village i to the nearest waterbody;
Dis2coastl is the Euclidean distance from village i to the nearest coastline;
Dis2city is the the Euclidean distance from village i to the city center;
Dis2county is the the Euclidean distance from village i to the nearest county center;
Elevation is the the average elevation within village i;
Dis2road is the the Euclidean distance from village i to the nearest road;
Nei_Built_ is the the area of built-up land (Nei Built.upit) in the neighboring villages of village i in year t;
Treated is a binary variable, Treated = 1 to the villages that were partially or entirely located inside the development-permitted zones, and Treated = 0 to the villages that were entirely located outside the development-permitted zones;
Intensity is the percentage of land that was assigned to the development-permitted zones in village i;
Year represent the year in 1995, 2000, 2005, 2010, 2013, 2015, 2018, and 2020;
BuLE is the dependent variable, representing built-up land expansion in village i in year t;
Town is town' unique administrative ID.

Method: First, we employed propensity score matching to overcome the selection bias and satisfy the parallel trend
assumption. Second, we built four Difference-in-Difference models to estimate the average and annual effect.

en: annual-effect land-use-change land-use-planning plan-evaluation psm-did

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Causal effect of LUP

title_for_slug: causal-effect-of-lup

educ

en: Education, culture and sport

en:
Data.dbf contains the varibles of 1662 villages in Zhangzhou Cities
PSM_DID.R can re-produce the results

en: causal-effect-of-lup

format: ZIP

media_type: application/zip

annual-effect

display_name: annual-effect

land-use-change

display_name: land-use-change

land-use-planning

display_name: land-use-planning

plan-evaluation

display_name: plan-evaluation

psm-did

display_name: psm-did


causal-effect-of-mfoz

en:
Title: Closer to causality: How effective is spatial planning in governing built-up land expansion in Fujian Province, China?

Research objective: The Major Function Oriented Zone (MFOZ), the first strategic spatial plan in China, is developed to achieve a coordinated regional development, through spatial regulation and zoning of development. The MFOZ he MFOZ divided land into four major function-oriented zones: The development-optimized zone, the development-prioritised zone, the development-restricted zone, and the development-prohibited zone. We used propensity score marching to evaluate the effect of the MFOZ on built-up land expansion in Fujian Province over three time intervals (2013–2015, 2013–2018 and 2013–2020).

Data: Data.xlsx contains the variables of 954 towns in Fujian Province.
Town_ID is the town unique ID;
County_ID is the county unique ID;
City_ID is the city unique ID;
MFOZ is the the development-prioritised zone and the development-restricted zone (The development-optimized zone and the development-prohibited zone are excluded);
Builtup_13_15 is the built-up land expansion from 2013 to 2015;
Builtup_13_18 is the built-up land expansion from 2013 to 2018;
Builtup_13_20 is the built-up land expansion from 2013 to 2020;
Dis2water is the Euclidean distance from the town to the nearest waterbody;
Slope is the the average slope within the town;
GDP is the average GDP in 2010 within the town;
Pop is the average population in 2010 within the town;
Road is the average population in 2010 within the town;
Dis2city is the Euclidean distance from the town to the nearest prefectural city centre;
Nei_Arable, Nei_Forest, and Nei_Built.up are the area of arable land, forest land, and built-up land neighbouring town i in 2010.

Method: we used the propensity score matching to compare the changes in the amount of built-up land in the towns of the development-prioritised zone with the matched towns of the development-restricted zone. Additionally, we used three evaluation intervals (2013–2015, 2013–2018 and 2013–2020) to evaluate temporal variation in the causal effect of the MFOZ on built-up land expansion.

en: built-up-land-change causality fujian-province propensity-score-matching selection-bias the-major-function-oriented-zone

en: Causal effect of MFOZ

title_for_slug: causal-effect-of-mfoz

en:
Data.xlsx is the variables of 952 townships
Table 1-2 NN(1-1)_noreplace_caliper(0.01).do is STATA code to produce the results in Table 1 and 2
Figure 5 Distribution of the propensity scores.R is R code rto produce Figure 5
Figure 5 Standard mean difference.R is R code rto produce Figure 5

en: Data and Stata code for repeating the results

built-up-land-change

display_name: built-up-land-change

causality

display_name: causality

fujian-province

display_name: fujian-province

propensity-score-matching

display_name: propensity-score-matching

selection-bias

display_name: selection-bias

the-major-function-oriented-zone

display_name: the-major-function-oriented-zone


aerosol-data-davos-wolfgang

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs) and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3788 , TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and DRINCZ: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l minˉ¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the DRoplet Ice Nuclei Counter Zurich (DRINCZ, ETH Zurich) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

en: aerosol drincz ice-nucleation inp particles raclets

en: Aerosol Data Davos Wolfgang

title_for_slug: aerosol-data-davos-wolfgang

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: OPC-N3 Dataset Davos Wolfgang

format: CSV

media_type: text/csv

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en: OPC GT-526S Dataset Davos Wolfgang

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Davos Wolfgang.

en: APS Dataset Davos Wolfgang

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity), in a temporal resolution of 2 minutes, with time in UTC, measured at Davos Wolfgang.

en: SMPS Dataset Davos Wolfgang

en: The DRINCZ file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en: DRINCZ Dataset Davos Wolfgang

aerosol

display_name: aerosol

drincz

display_name: drincz

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

particles

display_name: particles

raclets

display_name: raclets


aerosol-data-weissfluhjoch

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Weissfluhjoch (LON: 9.806475, LAT: 46.832964). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs), and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (SMPS 3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3787 TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and LINDA: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l min‾¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the LED based Ice Nucleation Detection Apparatus (LINDA, University of Basel) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

en: aerosol ice-nucleation inp linda particles raclets

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Aerosol Data Weissfluhjoch

title_for_slug: aerosol-data-weissfluhjoch

educ

en: Education, culture and sport

en: OPC-N3 Dataset Weissfluhjoch

en: OPC-GT526S Dataset Weissfluhjoch

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Weissfluhjoch.

en: APS Dataset Weissfluhjoch

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity) in a temporal resolution of 2 minutes, with time in UTC, measured at Weissfluhjoch.

en: SMPS Dataset Weissfluhjoch

en: The LINDA file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en: LINDA Dataset Weissfluhjoch

linda

display_name: linda


en:
The present dataset is part of the report titled Gradinaru S.R., Hersperger A.M., Schmid F. (2021). Deriving Planning Intentions from written planning documents. Report on CONCUR Project- From plans to land change: how strategic spatial planning contributes to the development of urban regions.
The data corresponds to the data collected as part of the DPI Method for deriving all PIs contained in a plan (open coding) as detailed in section 4 of the report. The method involved reading the plans to break down of information in meaningful discrete “incidents” or planning intentions. To identify the planning intentions, the starting points were represented by a) the structuring of the plans in chapters and sub chapters and b) the themes that the plans addressed. Thus, the collected information was not grouped according to pre-defined categories of planning intentions, but rather put together as a list of intentions as revealed by each plan. As a result, we provide, for each case study, a document (named [Urban region name] PI as defined in the plan) which contains:
	Date when the information was filled in.
	Name of the urban region and analysed strategic spatial plan .
	A list of all planning intentions contained in a plan, with each PI being addresses as follows:
	Name of PI as it appears in the plan
	Translated name of the PI (i.e. short name for easy understanding of the meaning)
	Explanation regarding the meaning of the PI
	Why the PI is considered a priority for the urban region
	Spatial information on the PI (text and cartographic representations).
In total, 14 documents are available, one for each case study. Documents contain up to 20 pages of information extracted from the plans together with explanations and notes taken during plan reading.

en: development-priorities europe spatial-information strategic-plans urban-region

en: Planning intentions in strategic plans of European urban regions

en: Planning intentios

development-priorities

display_name: development-priorities

europe

display_name: europe

spatial-information

display_name: spatial-information

strategic-plans

display_name: strategic-plans

urban-region

display_name: urban-region


en:
These data include all avalanches that were mapped in the region of Davos, Switzerland during the winters 1998-1999 to 2018-2019 (21 years), in total 13,918 avalanches, and the corresponding forecast danger level valid on the day of avalanche occurrence, 3533 days and danger ratings in total.

This avalanche activity data set was analysed and results published by Schweizer et al. (2020). They found that the
number of avalanches per day strongly increased with increasing danger level, but avalanche size was poorly related to avalanche danger level.

The data are provided in two files: the first includes the avalanche data (13,918 records); the second includes the avalanche activity per day (3533 records).
Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Schweizer, J., Mitterer, C., Techel, F., Stoffel, A. and Reuter, B., 2020. On the relation between avalanche occurrence and avalanche danger level. The Cryosphere, 14, 737-750, https://doi.org/10.5194/tc-14-737-2020.

en: avalanche-activity avalanche-forcasting avalanche-size danger-level snow-avalanche

en: Snow avalanche data Davos, Switzerland, 1999-2019

en: The Readme file contains the description of the two data files.

en: Readme

en: This data file includes data on the avalanches mapped in the region of Davos.

en: Snow avalanche data

en: This data file includes data on the avalanche activity per day aggregated from the avalanche data.

en: Avalanche activity data

avalanche-activity

display_name: avalanche-activity

avalanche-forcasting

display_name: avalanche-forcasting

avalanche-size

display_name: avalanche-size

danger-level

display_name: danger-level

snow-avalanche

display_name: snow-avalanche


en:
This database contains 1957 distribution maps of species from Fagales and Pinales constructed based on a method integrating polygon mapping and SDMs (Lyu et al., 2022).
To construct the maps, we first collected occurrence data from 48 different sources. According to the number of occurrences after data cleaning, three kinds of maps are constructed: (1) For species with more than 20 occurrences, we performed SDM and polygon mapping described in Lyu et al. (2022) and select the integration of the two layers as the distribution range; (2) For species with more than 4 but less than 20 occurrences, we only use polygon mapping to draw the distribution range; (3) For species with less than 4 occurrences, a 20-km buffer was generated around the occurrences as the distribution range. The maps were manually checked and evaluated (see Note S3 and Table S9 in Lyu et al., 2022 for details).

en: fagales pinales species-distribution-model species-occurrence species-range-map species-richness

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Species distribution maps of Fagales and Pinales (GDPlants)

educ

en: Education, culture and sport

en: species_map.zip includes species 1690 range maps generated based on the integrated method described in Lyu et al., (2022). File names with (polygon) indicate that this map is only generated by polygon mapping, as there are not enough occurrences for SDMs.

en: Species range maps of species in Fagales and Pinales (with enough occurrences)

en: Point_buffer.zip includes 267 occurrence maps of species that do not have enough occurrence data for polygon mapping.

en: Occurrence maps for species of Fagales and Pinales with few records

fagales

display_name: fagales

pinales

display_name: pinales

species-distribution-model

display_name: species-distribution-model

species-occurrence

display_name: species-occurrence

species-range-map

display_name: species-range-map

species-richness

display_name: species-richness


modeling-snow-failure-with-dem

en: This data set includes the modeling results described in the research article by Bobiller et al. (2020). All the figures in the article can be reproduced with the data provided.

en: discrete-element-modelling snow snow-avalanche snow-failure snow-micro-mechanics

en: Modeling snow failure with DEM

title_for_slug: modeling-snow-failure-with-dem

en: The read-me file contains a description of all the data provided in the zip file.

en: Read-me

en: The zip file contains the data underlying the figures presented in Bobillier et al. (2019). The figures can be reproduced with the python file, which is also provided.

en: Dataset

en: Python file to reproduce the figures in Bobillier et al. (2019)

en: Python file

discrete-element-modelling

display_name: discrete-element-modelling

snow

display_name: snow

snow-failure

display_name: snow-failure

snow-micro-mechanics

display_name: snow-micro-mechanics


en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

en: barcelona copernicus imperviousness milan soil-sealing urban-atlas

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Soil sealing Barcelona and Milan different territorial levels

en: Information on data sources

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas


en: SnowMicroPen (SMP) measurements and manual snowpits from Dronning Maud Land, East Antarctica. Measurements were taken in the vicinity of the Belgium Princess Elisabeth Station (PEA), in a transect towards the coast, and on the Lokeryggen and Hammarryggen Ice Rises near the coast. Measurements were taken during 3 individual campaigns in the 2016-2017, 2018-2019 and 2019-2020 field seasons.

en: antarctica microstructure snow-density snow-density-profile snowmicropen

envidat

en: EnviDat: the Environmental Data Portal

en: SnowMicroPen measurements and manual snowpits from Dronning Maud Land, East Antarctica

educ

en: Education, culture and sport

en: List of all SnowMicroPen measurements, including date and location, and processing status. This list has been generated by the python code (see other resources in this dataset).

en: List of SnowMicroPen measurements

en: Zip archive containing the acquired *.pts files (binary files recorded by the SnowMicroPen), and the converted *.txt files using the SMP.ipynb jupyter notebook (see the python code in the other resources in this dataset)

en: SnowMicroPen pts files and processed txt files

en: This *.zip archive contains all available documentation of the SnowMicroPen measurements, including the mapping of the SMP measurements in the terrestrial laser scan field at PEA (see documentation for 20161220) and at the Hammarryggen Ice Rise (see documentation for 20190104 and 20190111).

en: Documentation SnowMicroPen measurements

en: Jupyter notebook for processing the SnowMicroPen files.

en: Python code exported from the Jupyter notebook for processing the SnowMicroPen files

en: Manual snow pits and other snow density measurements

antarctica

display_name: antarctica

microstructure

display_name: microstructure

snow-density

display_name: snow-density

snow-density-profile

display_name: snow-density-profile

snowmicropen

display_name: snowmicropen


en: This questionnaire survey was conducted as an online survey and aimed at investigating the relationship between physical forest characteristics, visual attractiveness of forest and the perception of ecological and cultural ecosystem services in urban forests. Each participant was shown 6 photos out of a pool of 50 photos taken from the Swiss National Forest Inventory (NFI) database. Physical forest characteristics were derived from the photos. The study was conducted as part of the "WaMos meets LFI" (WML) project.

en: adults-and-teenagers nfi-photos online-questionnaire-survey perception-of-ecosystem-services visual-attractiveness

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Relationship between physical forest characteristics, visual attractiveness and perception of ecosystem services in urban forests

en: SPSS-Dataset

en: Dataset in csv-format

en: Codebook to SPSS-file

en: Questionnaire German

en: Questionnaire French

en: Questionnaire Italian

adults-and-teenagers

display_name: adults-and-teenagers

nfi-photos

display_name: nfi-photos

online-questionnaire-survey

display_name: online-questionnaire-survey

perception-of-ecosystem-services

display_name: perception-of-ecosystem-services

visual-attractiveness

display_name: visual-attractiveness


en:
The wind-driven saltation of sand and snow shapes dunes and ripples, generates dust emission, and erodes the surface of the Antarctic ice sheet. Here, we use a model based on the discrete element method to simulate grain-flow interactions and study the effect of particle cohesion on saltation dynamics.

The data contains the model output of granular splash simulations and saltation simulations. Granular splash, the main particle entrainment process in saltation, occurs upon impact of saltating particles with the granular bed. We performed Monte Carlo simulations of granular splash for loose sand grains and for cohesive ice grains. The analysis indicate that different values of cohesion have significant effects not on the number of splashed grains, on the ejection velocity, and the rebound velocity.

In our saltation simulations, we trigger particle movement with a single splash event at the inlet section section and let the system evolve until steady state. Our results show that saltation over cohesive surfaces is difficult to initiate but easy to sustain at low wind speed. The occurrence of transport thus depends on the history of the wind speed, a phenomenon known as hysteresis. We also show that saltation over cohesive surfaces presents higher mass fluxes but requires longer distances to saturate, which increases the size of the smallest stable surface ripples. Our model results have implications for large-scale aeolian processes on Earth and Titan, where sand grains are thought to be very cohesive.

en: cohesion saltation sand sediment snow wind

envidat

en: EnviDat: the Environmental Data Portal

en: Saltation of cohesive granular materials

educ

en: Education, culture and sport

en: Model results on granular splash and saltation process of sand and snow particles

en: Output of the model simulations

cohesion

display_name: cohesion

saltation

display_name: saltation

sand

display_name: sand

sediment

display_name: sediment

snow

display_name: snow

wind

display_name: wind


en: This is a technical documentation of the procedure to run the Weather Research and Forecasting (WRF) model over complex alpine terrain using Consortium for Small-Scale Modeling (COSMO) reanalysis by the Federal Office of Meteorology and Climatology (MeteoSwiss) as initial and boundary conditions (COMSO-WRF). The setup is adapted for very high resolution simulations based on COSMO-2 (2.2 km resolution) reanalysis. This document gives an overview over steps to setup COSMO-WRF and adaptations needed to run COSMO-WRF. Additionally, the calculation of precipitation rate at a horizontal plane and remapping COSMO-WRF output on Swiss coordinates are documented.

en: complex-terrain cosmo-wrf high-resolution meteoswiss numerical-simulation

en:
Gerber, Franziska; Sharma, Varun (2018). Running COSMO-WRF on very-high resolution over complex terrain. EnviDat. doi:10.16904/envidat.35

Documentation about the procedure to run COSMO-WRF

en: COSMO-WRF documentation v1.0

en: Scripts to process meteorological data (see Section 2 in COSMOWRFdocumentation.pdf).

en: MeteorologicalData

en:
Scripts to process geographical/static data (see Section 3 in COSMOWRFdocumentation.pdf).
- ascii_to_bin_landuse.f90
- ascii_to_bin_soiltype.f90
- ascii_to_bin_topo_wgs84_ws2sf1.f90
- see_slopes.ncl
- soiltype_writing.py
- toposmooth_wgs84_cosmobound.ncl
- write_geogrid.o

en: StaticData

en: Scripts that need to be changed to compile WPS (see COSMOWRFdocumentation.pdf, Section 4)

en: WPSSetup

en: Scripts to run the WRF pre-processing (WPS) for COSMO-WRF simulation (see Section 5 in COSMOWRFdocumentation.pdf)

en: WPSrun

en: Scripts to run COSMO-WRF simulation (see Section 6 in COSMOWRFdocumentation.pdf)

en: WRFrun

en: Postprocessing scripts to map WRF output on swiss coordinates (see Section 7 in COSMOWRFdocumentation.pdf)

en: Postprocessing

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

high-resolution

display_name: high-resolution

meteoswiss

display_name: meteoswiss

numerical-simulation

display_name: numerical-simulation


rorcc

en:
The dataset "RoRCC" consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
1) metadata on the RoR power plants under consideration, 2) annual and seasonal production potential scenarios under into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099), 3) annual and seasonal streamflow scenarios, 4) annual and seasonal production loss due to environmental flow requirements, 5) annual and seasonal the technical increase potential (via design discharge optimisation) and 6) annual and seasonal changes in the hydrological cycle.

en: climate-change design-discharge environmental-flow hydropower run-of-river-power-plants

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: RoRCC

title_for_slug: rorcc

educ

en: Education, culture and sport

en:
The dataset “RoRCC” consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
-	metadata on the RoR power plants under consideration
-	annual and seasonal production scenarios differentiated into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)
-	annual and seasonal production loss due to environmental flow requirements
-	annual and seasonal the technical increase potential (via design discharge optimisation)
-	annual and seasonal changes in the hydrological cycle for the three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)

climate-change

display_name: climate-change

design-discharge

display_name: design-discharge

environmental-flow

display_name: environmental-flow

hydropower

display_name: hydropower

run-of-river-power-plants

display_name: run-of-river-power-plants


en:
There are many sources providing atmospheric weather station data for the Antarctic continent. However, variable naming, timestamps and data types are highly variable between the different sources. The published python code intends to make processing of different AWS sources from Antarctica easier. For all datasets that are taken into account variables are renamed in a consistent way. Data from different sources can then be handled in one consistent python dictionary.

The following data sources are taken into account:

* AAD: Australian Antarctic Division (https://data.aad.gov.au/aws)
* ACECRC: Antarctic Climate and Ecosystems Cooperative Research Centre by the Australian Antarctic Division
* AMRC: Antarctic Meteorological Research Center (ftp://amrc.ssec.wisc.edu/pub/aws/q1h/)
* BAS: British Antarctic Survey (ftp://ftp.bas.ac.uk/src/ANTARCTIC_METEOROLOGICAL_DATA/AWS/; https://legacy.bas.ac.uk/met/READER/ANTARCTIC_METEOROLOGICAL_DATA/)
* CLIMANTARTIDE: Antarctic Meteo-Climatological Observatory by the italian National Programme of Antarctic Research (https://www.climantartide.it/dataaccess/index.php?lang=en)
* IMAU: Institute for Marine and Atmospheric research Utrecht (Lazzara et al., 2012), https://www.projects.science.uu.nl/iceclimate/aws/antarctica.ph
* JMA: Japan Meteorological Agency (https://www.data.jma.go.jp/antarctic/datareport/index-e.html)
* NOAA: National Oceanic and Atmospheric Administration (https://gml.noaa.gov/aftp/data/meteorology/in-situ/spo/)
* Other/AWS_PE: Princess Elisabeth (PE), KU Leuven, Prof. N. van Lipzig, personal communication
* Other/DDU_transect: Stations D-17 and D-47 (in transect between Dumont d’Urville and Dome C, Amory, 2020)
* PANGAEA: World Data Center (e.g. König-Langlo, 2012)

Important notes

* Information about data sources is available. Some downloading scripts are included in the provided code. However, users should make sure to comply with the data providers terms and conditions.
* Given changing download options of the differnent institutions the above links may not permanently work and data has to be retrieved by the user of this dataset.
* No quality control is applied in the provided preprocessing software - quality control is up to the user of the datasets. Some dataset are quality controlled by the owner.

Acknowledgements
--------------------------
We thank all the data providers for making the data publicly available or providing them upon request. Full acknowledgements can be found in Gerber et al., submitted.

References
---------------
Amory, C. (2020). “Drifting-snow statistics from multiple-year autonomous measurements in Adélie Land, East
Antarctica”. The Cryosphere, 1713–1725. doi: 10.5194/tc-14-1713-2020

Gerber, F., Sharma, V. and Lehning, M.: CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB, JGR - Atmospheres, submitted.

König-Langlo, G. (2012). “Continuous meteorological observations at Neumayer station (2011-01)”. Alfred Wegener
Institute, Helmholtz Centre for Polar and Marine Research, Bremerhaven, PANGAEA, doi: 10.1594/PANGAEA.
775173

en: antarctica aws consistent cryowrf python

en: Preprocessing Antarctic Weather Station (AWS) data in python

en: Scripts to preprocess (and download for some databases) atmospheric weather station data. Furthermore, a list of stations and a map can be created to have an overview.

antarctica

display_name: antarctica

aws

display_name: aws

consistent

display_name: consistent

cryowrf

display_name: cryowrf

python

display_name: python


intratrait

en:
This data set was used to test whether species specialized to high elevations or with narrow elevational ranges show more conservative (i.e. less variable) trait responses across their elevational distribution, or in response to neighbours, than species from lower elevations or with wider elevational ranges. We did so by studying intraspecific trait variation of 66 species along 40 elevational gradients in four countries (Switzerland, Australia, New Zealand, China) in both hemispheres. As an indication of potential neighbour interactions that could drive trait variation, we also analysed plant species’ height ratio, its height relative to its nearest neighbour.
The following traits and parameters were measured and are available in this data set:
As an indication of plant stature, we measured vegetative and generative height, where vegetative height was distance from soil to highest vegetative leaf and generative height was distance to the highest point on the reproductive shoot. As a measure of reproductive investment, we noted the presence of flowers on the randomly chosen individuals (see below). As a measure of individual and genet basal area, we measured individual plant and patch diameters, in two dimensions (along the largest diameter and perpendicular to it). In clonal plant species, plant diameter was equivalent to an individual rosette, whereas patch diameter referred to the whole genet and could represent the size of a tuft, tussock or cushion. For genera with more singular growth forms (e.g., some Gentiana species) plant and patch diameter were the same. The two diameter measurements were made at right angles, allowing estimates of patch and plant areas to be calculated as an ellipse (i.e., area = 0.5 a 0.5 b Π). All traits were measured on ten randomly selected individuals per site. Flower count data was considered in a binary fashion on a per individual basis (because for some species individuals only produce one flower when flowering) so that the presence or absence of flower(s) was a nominal value between 0 and 10 for each species at each site. We then collected at least three leaves (up to 30 for small and light leaves) from each of the first three individuals selected from each species for determination of leaf dry matter content (LDMC) and specific leaf area (SLA). For calculations of LDMC and SLA, fresh leaves were scanned on a flatbed scanner to determine leaf area. Leaves were then weighed on a balance to a precision of +/- 0.001g, prior to being air dried and reweighed with a balance to a precision of +/- 0.0001g. LDMC was calculated by dividing dry leaf mass by fresh leaf mass. SLA was calculated by dividing leaf area by dry leaf mass. Additionally, within an area of 10 cm diameter around the target individual, we determined the tallest neighbouring species and measured its vegetative and generative height, and estimated the percent cover of the target species, other vegetation, rock, and bare soil.
For more details see Rixen et al. 2022, Journal of Ecology.

en: climate-change cold-adapted-plants elevation-gradient elevation-range neighbour-interactions plant-traits

en: intratrait

title_for_slug: intratrait

en: Plant trait data along elevation gradients on mountains

cold-adapted-plants

display_name: cold-adapted-plants

elevation-gradient

display_name: elevation-gradient

elevation-range

display_name: elevation-range

neighbour-interactions

display_name: neighbour-interactions

plant-traits

display_name: plant-traits


en: Compiled data on the impacts of seven important NNTs (Acacia dealbata, Ailanthus altissima, Eucalyptus globulus, Prunus serotina, Pseudotsuga menziesii, Quercus rubra, Robinia pseudoacacia) on physical and chemical soil and biodiversity in Europe, and summarise commonalities and differences. A total of 107 publications considered, studies referred to biodiversity attributes and soil properties: 2804 lines and 30 rows.

en: biodiversity biogeography forest-management pairwise-stand-comparisons soil-impacts

en: Impact of non-native tree species in Europe on soil properties and biodiversity: a review

en: Baseline data

en: Description of headers for data_wohlgemuth_etal_Neobiota_2022

en: headers

en: Bibliography of all references cited in data_wohlgemuth_etal_Neobiota_2022.

en: references

biodiversity

display_name: biodiversity

biogeography

display_name: biogeography

forest-management

display_name: forest-management

pairwise-stand-comparisons

display_name: pairwise-stand-comparisons

soil-impacts

display_name: soil-impacts


en:
This dataset contains all data, on which the following publication below is based.

**Paper Citation**:

Neff, F., Resch, M. C., Marty, A., Rolley, J. D., Schütz, M., Risch, A. C, Gossner, M. M. 2020. Long-term restoration success of insect herbivore communities in semi-natural grasslands: a functional approach. Ecological Applications, 30, e02133. [10.1002/eap.2133](https://doi.org/10.1002/eap.2133)

Please cite this paper together with the citation for the datafile.

 Methods

 Study site
The study area is situated within and nearby to Eigental nature reserve (47°27’36” to 47°29’06” N, 8°37’12” to 8°37’44” E, 461 to 507 m a.s.l.) in the vicinity of Zurich airport (Canton Zurich, Switzerland). Mean annual precipitation and temperature is 903 ± 136 mm and 9.14°C ± 0.50°C (mean ± SD for 2007-2017 (*MeteoSchweiz 2018*)). In 1967, the Eigental nature reserve was established to protect small and isolated remnants of species-rich, semi-natural grasslands (roughly 12 ha), which were embedded in an otherwise intensively managed landscape. It is characterized by oligo- to mesotrophic Molinion (semi-wet, matrix species *Molinia caerulea*) and Mesobromion (semi-dry, matrix species *Bromus erectus*) meadows (*Delarze et al. 2015*), reflecting small-scale habitat heterogeneity, mainly due to site-specific groundwater levels and slope inclination. As in most Central European grasslands, management is necessary to prevent shrub and tree invasions as well as to secure low levels of available soil nutrients and thus to maintain these species-rich habitats ([*Poschlod and WallisDeVries 2002*](https://doi.org/10.1016/S0006-3207(01)00201-4)).
In 1990, the government of the Canton Zurich decided to enlarge the Eigental nature reserve as a counter measure against degradation and biodiversity loss in semi-natural grasslands due to overutilization and the excessive input of nutrients (mostly nitrogen). Eleven patches of adjacent intensively managed grassland (in total roughly 20 ha) were targeted to be transformed into semi-natural grasslands. As a first restoration measure, fertilization was ceased, and biomass harvested three times to remove excessive soil nutrients from the original system and thus benefit plant species with low competitive ability on the long run. In 1995, the restoration efforts were increased and a large-scale experiment comprising three restoration measures with increasing intervention intensities was implemented:

- **Harvest only**: Initial restoration measures were continued with mowing and removing of the aboveground biomass two times a year (early summer and autumn).
- **Topsoil**: Removal of topsoil, depending on the thickness of the A horizon the upper 10 to 20 cm, in four randomly selected areas within the eleven patches in late autumn 1995. The size of the restoration area depended on individual patch size (2700 to 7000 m2).
- **Topsoil + Propagules**: Plant propagules were added on half of the area where topsoil was removed via application of fresh, seed-containing hay and hand-collected propagules of target species originating from semi-dry and semi-wet species-rich grasslands with local and regional provenance (within radius of 7 to 30 km) (1995, 1996, 1997).

Management of *Topsoil* and *Topsoil + Propagules* started five years after treatment implementation and included yearly mowing and removing of aboveground biomass (late summer or early autumn). The experiment was complemented with intensively managed grassland sites that share the same agricultural history as the restored sites (**Initial**; swards dominated by *Lolium perenne*, *L. multiflorum* and *Trifolium repens*): mowing and subsequent fertilizing (manure) up to five times a year, as well as different tillage regimes. Finally, sites were selected in target semi-dry and semi-wet grasslands (**Target**) located within the Eigental nature reserve and another nature reserve nearby (Altläufe der Glatt; 47°28’29” to 47°27’41” N, 8°31’56” to 8°32’26” E, 418 to 420 m a.s.l.). The selected target sites are mown and aboveground biomass removed once a year in late summer or early autumn. For each of the five treatments, we selected eleven plots (5 m × 5 m) spread across the sites. Altogether, the experiment included 55 plots.

 Arthropod sampling
Aboveground arthropods were sampled using suction sampling on four consecutive days in early July 2017 before the grasslands were mown. Arthropods were sampled in two locations on each 5 m × 5 m plot, once in the south-western and once in the north-eastern corner to account for possible spatial heterogeneity within the plots. Arthropods were sorted to order or lower taxonomic levels and individuals were identified to species level. We focused on three groups (Hemiptera: Auchenorrhyncha, Hemiptera: Heteroptera, Orthoptera),

 Functional traits
We used two sets of functional traits in this study.

**Morphometric traits**:
Body volume, body shape, hind femur shape, hind/front leg ratio, wing length, leg length, antenna length and eye width. We used trait measurements from [*Simons et al. (2016)*](http://dx.doi.org/10.1890/15-0616.1) and [*Neff et al. (2019)*](https://doi.org/10.1007/s10980-019-00872-1) and complemented them with measurements on study specimens. These measurements were conducted using a high-resolution measuring stereo microscope (Leica DVM6, Leica Microsystems) including automated high-resolution photo stacking with the software Leica Application Suite X (LAS X, © 2018 Leica Microsystems CMS GmbH) and Leica Map Premium (Leica Microsystems, © 1996-2017 Digital Surf) at WSL Birmensdorf. The eight morphometric traits were calculated from direct measurements of body parts on specimens of all sampled species. From each species, we measured at least one female and one male specimen. Additionally, for species that show wing dimorphism, we included the different wing morphs and weighted them by their prevalence reported in literature. For few species, of which not all wing morphs were available for measurements (10 cases), we estimated relative wing length from congeneric species or from the literature.

**Life-history traits**
Based on an existing data set collected by [*Gossner et al. (2015)*](http://dx.doi.org/10.1890/14-2159.1). We included traits describing different life-history characteristics of herbivore insect species, namely: feeding specialization, feeding tissue, hibernation stage and number of generations per year, which are related to insect species’ vulnerability to changes in plant community composition, microhabitat use and disturbance tolerance. To represent potential changes in habitat moisture with abandonment of intensive land use (e.g., change in ground-water level), we also included two traits related to preferred habitat moisture of the study species: moisture preference, describing species’ optimum habitat moisture, and moisture range, which describes the species’ range of preferable moisture conditions.

 References

Delarze, R., Y. Gonseth, S. Eggenberg, and M. Vust. 2015. Lebensräume der Schweiz: Ökologie - Gefährdung - Kennarten. 3rd ed. Ott, Bern.

Gossner, M. M., N. K. Simons, R. Achtziger, T. Blick, W. H. O. Dorow, F. Dziock, F. Köhler, W. Rabitsch, and W. W. Weisser. 2015. A summary of eight traits of Coleoptera, Hemiptera, Orthoptera and Araneae, occurring in grasslands in Germany. Scientific Data 2:150013.

MeteoSchweiz. 2018. Klimabulletin Jahr 2017. MeteoSchweiz, Zürich.

Neff, F., N. Blüthgen, M. N. Chisté, N. K. Simons, J. Steckel, W. W. Weisser, C. Westphal, L. Pellissier, and M. M. Gossner. 2019. Cross-scale effects of land use on the functional composition of herbivorous insect communities. Landscape Ecology 34:2001–2015.

Poschlod, P., and M. F. WallisDeVries. 2002. The historical and socioeconomic perspective of calcareous grasslands—lessons from the distant and recent past. Biological Conservation 104:361–376.

Simons, N. K., W. W. Weisser, and M. M. Gossner. 2016. Multi-taxa approach shows consistent shifts in arthropod functional traits along grassland land-use intensity gradient. Ecology 97:754–764.

en: diversity functional-diversity functional-traits grassland insects long-term-experiment restoration topsoil-removal

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Grassland restoration: insects and insect traits

educ

en: Education, culture and sport

en:
Abundance of adult insects recorded in the samplings on all experimental sites

- **Plot**: ID of Plot
- **Treatment**: Experimental treatment
- **Species**: Insect species name (following [Fauna Europaea](https://fauna-eu.org))
- **Author**: Author and year of species' description (following [Fauna Europaea](https://fauna-eu.org))
- **Group**: Insect group as used in the analyses
- **Number_Adults**: Number of adult individuals recorded
- **Herbivore**: Logical indicating whether the species is feeding as a herbivore (*TRUE*) or not (*FALSE*)

en: Insect abundance

en:
Functional traits of all herbivorous insect species sampled in the study.

- **Species**: Insect species name (following [Fauna Europaea](https://fauna-eu.org))
- **Author**: Author and year of species' description (following [Fauna Europaea](https://fauna-eu.org))
- **Group**: Insect group as used in the analyses
- **Body volume**: Body volume determined by body length, body width and body height (in mm$^3$)
- **Body_shape**: Ratio of body length to body width
- **Hind_femur_shape**: Ratio of hind-femur length to hind-femur width
- **Hind_front_leg_ratio**: Ratio of front-leg length to hind-leg length (leg length = femur length + tibia length)
- **Wing_length_rel**: Ratio of wing length to body length
- **Leg_length_rel**: Ratio of front-leg length to body length (leg length = femur length + tibia length)
- **Antenna_length_rel**: Ratio antenna length to body length
- **Eye_width_rel**: Ratio of eye width to head width (Auchenorrhyncha, Heteroptera) / to head height (Orthoptera)
- **Feeding_specialization**: Insect specialization on food source (*m*: monophagous, *o*: oligophagous, *p*: polyphagous)
- **Feeding_tissue**: Feeding tissue used for feeding (*c*: chewers, *x*: xylem, *p*: phloem, *m*: mesophyll, *m-p/r*: mesophyll as well as phloem and/or reproductive organs, *r*: reproductive organs, *se*: ripe seeds)
- **Hibernation**: Hibernation stage (*e*: egg, *e/n*: egg and nymph, *n*: nymph, *a*: adult)
- **Generations**: Number of generations per year (*1.5* stands for *1-2* generations per year)
- **Moisture_pref_mean**: mean of preferred habitat moistures (*1*: xerophilous, *2*: moderately xerophilous, *3*: moderately mesohygrophilous, *4*: mesohygrophilous, *5*: moderately hygrophilous, *6*: hygrophilous, *7*: moderately hydrophilous, *8*: hydrophilous)
- **Moisture_pref_range**: range of preferred habitat moistures (indicating degree of specialization)

en: Insect traits

en:
Information on the experimental plots.

- **Plot**: ID of Plot
- **Treatment**: Experimental treatment
- **Landuse_history**: recent agricultural use for Initial; agricultural use before restoration for all restored sites
- **Last_tilled**: Last time the site was tilled
- **Intensity**: Frequency and intensity of mowing and manuring (*intensity1*: mowing once and no manure, i*ntensity2*: 2-3 times mowing and no manure, *intensity3*: 2-3 times mowing and manuring, *intensity4*: 4-5 times mowing and manuring)
- **Slope**: slope gradient according to classes defined by FAO (1990)
- **X**: X coordinate of the plot (CH1903)
- **Y**: Y coordinate of the plot (CH1903)
- **Cluster**: Spatial cluster of the plot

en: Plot information

diversity

display_name: diversity

functional-diversity

display_name: functional-diversity

functional-traits

display_name: functional-traits

grassland

display_name: grassland

insects

display_name: insects

long-term-experiment

display_name: long-term-experiment

restoration

display_name: restoration

topsoil-removal

display_name: topsoil-removal


en: Data are compiled that have been used to demonstrate the impact of high water partial pressure on X-ray absorption spectra of ice.

en: atmosphere chemistry ice laboratory-study snow-atmosphere-interactions

en: An ice oxygen K-edge NEXAFS spectroscopy data set on gas-phase processing

en:
The table lists all NEXAFS raw data with the following columns:

* name:						raw file name
* xRayEkinRange_eV: 		Smallest and largest X-ray photon energy in eV
* scientaPassEnergy_eV: 	Pass energy of electron analyzer in eV
* scientaDwellTime_ms: 		Dwell time of electron analyzer in ms
* regionName:				O K-edge for all data
* scientaAcquisitionMode: 	Fixed energy (snapshot) mode
* scientaEkinRange_eV: 		Smallest and largest energy of the kinetic energy window used for detection in this work
* scientaEkinStep_eV		Not defined in fixed energy mode
* scientaLensMode:			Tune table
* scientaRegionIterations: 	Iterations (sweeps)
* scientaSequenceIterations: Iterations (sweeps)
* sampleTemp_dC: 			Temperature as monitored at the sample holder in °C
* cellPressure_mbar: 		Total pressure in measurement cell in mbar
* iceTemp_dC: 				Temperature of ice sample calculated based on vapour pressure (assuming total pressure equals partial pressure of water) in °C
* smplX_mm: 				positon of measurement spot, x dimension in mm
* smplY_mm: 				positon of measurement spot, y dimension in mm
* smplZ_mm: 				positon of measurement spot, z dimension in mm
* sealingTemp:				temperature at base of sample manipulator
* lastModifiedDatestr: 		time and date when data aquisition was finished
* sample: 					sample description

en: Near Ambient Pressure partial Auger-Meitner electron yield X-ray absorption spectra and photon flux data. X-ray energy in eV in column 1, analyzer electron count intensity in arb. units in column 2.

en: Processed data as shown in Figure 4 of publication. X-ray energy in eV in column one, electron count intensity in arb. units in column 2.

atmosphere

display_name: atmosphere

chemistry

display_name: chemistry

ice

display_name: ice

laboratory-study

display_name: laboratory-study

snow-atmosphere-interactions

display_name: snow-atmosphere-interactions


en: The dataset contains several snow models in the Standard Tesselated Geometry File Format (stl) for 3D visualization, printing and additive manufacturing. Different snow types are available (new snow, rounded snow, depth hoar, buried surface hoar, graupel).

en: 3d-model 3d-print depth-hoar new-snow rounded-snow snow snow-cast weak-layer

en: This file contains information about the stl-files of the different snow models. Snowtype (Schneeart), International Snow Classification, preview picture, notes about the origin of the snow, filename of the stl-data, and physical size of the model are given.

en: Description of snowtypes, filenames and other metadata

en: The zipped file contains all data described in the file 3d_snow_models_metadata. The stl-files should be ready for additive manufacturing.

en: Snow models in STL-format

depth-hoar

display_name: depth-hoar

new-snow

display_name: new-snow

rounded-snow

display_name: rounded-snow

snow

display_name: snow

snow-cast

display_name: snow-cast

weak-layer

display_name: weak-layer


en: In this study, the Austin metropolitan area, Texas, U.S., one of the fastest urban transformations and transformations regions, is selected to test the hypothesis that spatial planning and policies are important factors of urban transformations. Despite ample previous work in understanding the interactions between human and urban form transformation at specific areas, the actual interventions and outcomes of planning and policies (e.g., ‘smart growth’) on urban forms have been poorly measured. In this study, the potential influencing factors of urban transformations of Austin over 25 years were selected and collected.

en: austin driving-factors land-dynamics planning urban-land-use

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Potential driving factors of urban transformations of Austin over 25 years

educ

en: Education, culture and sport

austin

display_name: austin

driving-factors

display_name: driving-factors

land-dynamics

display_name: land-dynamics

planning

display_name: planning

urban-land-use

display_name: urban-land-use


en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

en: icecube intercomparison microct snow specific-surface-area

en: The file contains all micro-CT and IC measurements for snow types A, B, C, D and E used in our study. All samples were processed (and stored) in a cold laboratory at -15°C.

en: IceCube and MicroCT data

en: The file contains all measurements of the artificial particles for snow types A, B, C, D and E, including the artificial particle mass in the Petri dish.

en: Grain survey of snow particles

en: Jupyter notebook with TARTES simulations.

en: TARTES simulations

en: Statistics of samples

en: The file contains all data for the plot in figure 1 of the co-located density and SSA measurement at Summit, Greenland in May 2015, conducted by Schneebeli, Proksch, Schmid.

en: The file contains all micro-CT and IC measurements of the artificial snow data set. The data set was originally produced to investigate the influence of black carbon on SSA measurements.

en: artificial_snow_data set

en: SMP measurement files for snow types A, B, C and D.

en: These experiments investigate different possible errors by measuring the specific surface area (SSA) of snow with the near infrared method. The influence of black carbon on this measurement was disproved, the theory was therefore validated. It shows that sunlight has no influence on the measurement with the IceCube. Wind drift snow as thin layer on the sample can increase the measured value of the specific surface by a few percent. This could be part of the error, observed in former measurements at SLF. As reference for the measured SSA values with the near infrared method, computer tomography was used to verify the SSA values.

en: Influence of black carbon on the measurement of the specific surface of snow with the near infrared method - Philipp Baumann

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

specific-surface-area

display_name: specific-surface-area


en:
This dataset comprises a large array of ecological data for the European Alps:

  (1) Current soil and climate predictors at various resolutions.
  (2) GBIF observations of the European Alps Flora (~4,000 species).
  (3) Species habitat suitability maps (1,109 species; based on species observations filtered at 40x40-km)
  at various resolutions used in the study to generate (4); except 'expert'...
  (4) Expert, Taxonomic, phylogenetic and functional diversity of the study region at various resolutions
  (from 100-m to 40-km --> 100-m aggregated & mean to km + non-aggregated/predicted) for CLIM,
  SOIL and CLIM-SOIL models.
  (5) Ecological and altitudinal preferences of the European Alps Flora.
  (6) Data outputs of the related published article.
  (7) All scripts used for analyses.
  (8) Additional files used for analyses.
  (9) Improved set of species habitat suitability maps (~2,600 species; based on species observations
  filtered at 1x1-km) and related taxonomic diversity at 100-m resolution (aggregated to km +
  non-aggregated/predicted) for CLIM, SOIL and CLIM-SOIL models ---> not incorporated in the study.

en: climate ecological-indicator-values functional-diversity grain-size phylogenetic-diversity soil taxonomic-diversity

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Resolution in species distribution models shapes spatial patterns of plant multifaceted diversity

en: Data access

climate

display_name: climate

ecological-indicator-values

display_name: ecological-indicator-values

functional-diversity

display_name: functional-diversity

grain-size

display_name: grain-size

phylogenetic-diversity

display_name: phylogenetic-diversity

soil

display_name: soil

taxonomic-diversity

display_name: taxonomic-diversity


photogrammetric-drone-data-schurlialp

en: The data was collected on 16.04.2021 and on 28.05.2021 with a Wingtra Gen II and a Sony RX1 II RGB sensor to obtain snow depth and distribution data. Following the data collection, the data was processed with Agisoft Metashape. A 10cm DSM, a 10cm snow depth raster, a 3mm orthophoto and the original drone images are available for download.

en: drone-data dsm orthophoto photogrammetry uav wingtra

en: Photogrammetric Drone Data Schürlialp

title_for_slug: photogrammetric-drone-data-schurlialp

educ

en: Education, culture and sport

en:
- 10 cm DSM
- 10 cm HS
- 3 cm orthophoto
- original RGB images
- Agisoft Metashape Processing Report

All of the products are also available as a cloud optimized geotiff.

en: Data Access

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

uav

display_name: uav

wingtra

display_name: wingtra


tree-ring-laser-ablation-data

en:
This dataset contains the values of several chemical elements (Mg, Al, Si, S, K, Ca, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Sr, Tl, Pb, Bi) measured in the latewood of tree rings of Mongolian oak from Harbin, China, at a 5-year resolution. Due to the lack of a suitable reference material for wood, absolute concentration was not calculated, and the ratio between the chemical element and 13C was taken as proxy for the element signal.

In Harbin, one of the largest cities and most important industrial centers in northeastern China, air quality monitoring systems were built only by the end of 2015 to meet the national requirements. Thus, dendrochemical analyses could be used as a tool to complement for the lack of air quality data over longer periods of time, allowing for the reconstruction of the temporal trend of trace metals. Our main scopes were to: (a) assess the chemical composition of Quercus mongolica Fisch. ex Ledeb. tree rings from Harbin using a recently developed system of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), (b) identify the main chemical elements which
derived from air pollution and may be used as indicators over the period 1965–2020 in Harbin, while excluding those that were controlled by physiological processes in the tree, and (c) reconstruct the history of pollution in Harbin by comparing the tree-ring chemical composition of recent decades with that of previous decades, in trees growing in the highly polluted city of Harbin and in trees growing in a control site 90 km away from major pollution sources.

Briefly, the temporal trend of some elements was influenced by physiological factors, by environmental factors such as pollution, or influenced by both. Mg, K, Zn, Cu, Ni, Pb, As, Sr and Tl showed changes in pollution levels over time.

en: air-pollution dendrochemistry dendrochronology laser-ablation tree-rings

en: Tree-ring laser ablation data

title_for_slug: tree-ring-laser-ablation-data

en: Laser ablation data

air-pollution

display_name: air-pollution

dendrochemistry

display_name: dendrochemistry

dendrochronology

display_name: dendrochronology

laser-ablation

display_name: laser-ablation

tree-rings

display_name: tree-rings


en: This data includes (1) Scripts to aggregate landscape resistance layers into squared and hexagonal grids (i.e., different representations and resolutions), (2) Input resistance layers and focal nodes in .txt format to run in Circuitscape (Python implementation v4.0.5). Circuitscape is a software tool for modeling and analyzing landscape connectivity, which simulates movement of organisms across landscapes by estimating resistance to movement across each point of the landscape. (3) Scripts for the ecological network analysis, and (4) environmental predictors for amphibian whole-life cycle habitats used to describe the local environment for BGI design (i.e. topographic, hydrologic, edaphic, vegetation, land-use derived, movement-ecology related).

en: biodiversity circuit-theory ecological-corridors ecosystem-services network-analysis urban-planning

en: Multi-Scale Prioritization framework for Urban Blue-Green Infrastructure Planning to Support Biodiversity: Data & Codes

en: The zipped folder includes the script to aggregate the resistance layers into squared and hexagonal grids. The subfolders “Boundaries”, “Layers”, “Reference_grids”, and “Resistance_from_SDMs” contain files either called by the code or created in the process.The subfolder “Inputs_for_Circuitscape” contains the inputs to run Circuitscape, after doing some subsequent processing steps in QGIS (listed in the R script) with the files created with the script.

en: Amphibian movement resistance layers and scripts for connectivity modeling - part 1

en: The zipped folder includes the script to create and analyse the networks from Circuitscape outputs. The subfolders “Boundaries”, “Layers”, and “Reference_net” contain files either called by the code or created in the process. The subfolder “Outputs_from_Circuitscape” contains the outputs from Circuitscape including node and branch cumulative currents in a network format.

en: Amphibian movement resistance layers and scripts for connectivity modelling - part 2

biodiversity

display_name: biodiversity

circuit-theory

display_name: circuit-theory

ecological-corridors

display_name: ecological-corridors

ecosystem-services

display_name: ecosystem-services

network-analysis

display_name: network-analysis

urban-planning

display_name: urban-planning


en:
This data set includes 589 snow profile observations including a rutschblock test, observations of signs of instability and an assessment of the local avalanche danger level, mainly recorded in the region of Davos (eastern Swiss Alps) during the winter seasons 2001-2002 to 2018-2019.

These data were analyzed and results published by Schweizer et al. (2021). They characterized the avalanche danger levels based on signs of instability (whumpfs, shooting cracks, recent avalanches), snow stability class and new snow height.

The data are provided in a csv file (589 records); the variables are described in the corresponding read-me file.

These data are the basis of the following publication: Schweizer, J., Mitterer, C., Reuter, B., and Techel, F.: Avalanche danger level characteristics from field observations of snow instability, Cryosphere, 15, 3293-3315, https://doi.org/10.5194/tc-15-3293-2021, 2021.

 Acknowlegements
Many of the data were recorded by SLF observers and staff members, among those Roland Meister, Stephan Harvey, Lukas Dürr, Marcia Phillips, Christine Pielmeier and Thomas Stucki. Their contribution is gratefully acknowledged.

en: avalanche avalanche-danger avalanche-forecasting danger-level snow snow-instability

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Field observations of snow instabilities

en: This read-me file contains the descriptions of the variables.

en: Read-me file

avalanche

display_name: avalanche

avalanche-danger

display_name: avalanche-danger

avalanche-forecasting

display_name: avalanche-forecasting

danger-level

display_name: danger-level

snow

display_name: snow

snow-instability

display_name: snow-instability


en:
The R script eemma.R, which implements Ensemble End-Member Mixing Analysis (EEMMA) to estimate source fractions in mixtures, exploiting information contained in time-series correlations among tracer time series.

A brief user's guide, a demonstration script, and a demonstration data set are also provided, to accompany Kirchner, J.W., Mixing models with multiple, overlapping, or incomplete end-members, quantified using time series of a single tracer, Geophysical Research Letters, 2023.

The user's guide is available for public use under Creative Commons CC-BY-SA. Public use of the scripts is permitted under GNU General Public License 3 (GPL3); for details see https://www.gnu.org/licenses/

en: eemma emma end-member-mixing-analysis mixing-models stable-isotopes tracers

en: eemma.R, an R script for Ensemble End-Member Mixing Analysis

educ

en: Education, culture and sport

en: An R script that performs ensemble end-member mixing analysis

en: A brief user's guide to EEMMA, with illustrations using a simple data set

en: eemma user's guide

en: An R script for the vignettes (simple data analysis demonstrations) shown in the user's guide

en: eemma vignette script

format: OCTET

en: A simple data set for the vignette script

en: vignette data

format: TXT

media_type: text/plain

eemma

display_name: eemma

emma

display_name: emma

end-member-mixing-analysis

display_name: end-member-mixing-analysis

mixing-models

display_name: mixing-models

stable-isotopes

display_name: stable-isotopes

tracers

display_name: tracers